| Driving Type: | Electromechanical |
|---|---|
| Electric Current Type: | DC |
| Brand: | Bisen |
| Transport Package: | Export Carton |
| Trademark: | BISEN |
| Origin: | China |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
A.Magnetic limit switch .
B.Aluminum alloy Gear Box.
C.Thermal protection at 125ºC built in motor winding.
D.In case of power failure,the gate can be opened and closed manually after release cluth.
E.Built-in control board.
F.Proection class IP55.
G.Operating environment Temperature: -20ºC~+50ºC
a.Easy to install and maintain.
b.Terminals for Push button,Photocell,Flash lamp.
c.Digital display makes Easy Programming.
d.Electronic soft -start, ensures the motor stars steadily and smoothly.
e.Intelligent terminals for photocell, alarm lamp,external receiver, etc.
f.Optional wire control remote contro
1)This type of remote door opener is our new developed product Integrated Mechanical and electrical, ie, with PCB inside and this is an innovative sliding gate operator, which Low stand-by consumption is the best design for solar charging.
2)One touch easy programing,The contronl system learns the open and closing limit automatically.
3)Electronic soft -start, ensures the motor stars steadily and smoothly.
4)Digital display makes Easy Programming.
5)Release key for power failure and looking the operator's cover.
6)Intelligent terminals for photocell, alarm lamp,external receiver, etc.
7)asy to install and maintain,Optional wire control remote control.
8)Mechanical limit switch (spring limit switch) or magnetic limit switch is optional.
9)Release key for power failure.
10)Optional line control or remote control.
Trouble shooting
| Trouble | Cause | Shooting |
| Motor can not work | 1,No power supply 2,Break fuse 3,Surpass load |
1,Check power supply 2,Change fuse 3,Check if any barrier on the track |
| Can open but can not close | 1,Photocell is not connected properly 2,Photocell beam is block off 3,Photocell is broken |
1,Connect the photocell 2,Clear out obstacle 3,Change a new device |
| Can open (close) but can not close (open) |
1,Position of limit switch is not correct 2,Limit switch is damaged |
1,Adjust position 2,Change limit switch |
| Can not locate accurately | 1,Distance of limit switch is too large 2,Limit switch is wrong 3,Magnetic-stell's position is wrong |
1,Adjust position of limit switch 2,Change limit switch 3,Re-adjust the position |
| Release device is doesn't work | 1,Operating handle is broken 2,Worm gears are jammed |
1,Change the handle 2,Rotate the pinion |
| Push the "OPEN" button but the gate close |
Push the "OPEN" button but the gate close |
Connect correctly according to wiring diagram |
| Motor can turn but can not work | 1,Compression spring of clutch is dead 2,Gear box is released |
1,Change the spring 2,Couple the worm gear |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}